Table of Contents
Advertisement
1. Open WiFi settings. Your BryFi
will appear under the caption
"SET UP NEW AIRPLAY
SPEAKER" as BryFi-xxxxxx.
3. Your BryFi will join your WiFi
network. Once successfully
connected to your own WiFi
network, the blue LED on the front
of your BryFi will stop flashing
and you will hear the xylophone
startup sound.
Your system is now ready to play!
Select the BryFi speaker from the
list and tap Done.
Section 1 - iOS
2. Tap BryFi-xxxxxx. Select the
desired wireless network. We
then recommend changing the
speaker name to something easy to
remember. Tap Next on the AirPlay
Setup screen.
PLAYING A SONG:
Slide up "Control Center" from the
bottom of the screen (iOS9 and
earlier) and swipe left (iOS10). Tap
AirPlay (iOS9 and earlier) or click
the pull down at the bottom of the
pop-up screen (iOS10).
ACCESSING THE USER
INTERFACE:
Open a web browser like Safari and
enter {speaker name}.local into
the address bar, where {speaker
name} is whatever you named
your speaker while adding it to
your network in the previous steps.
The speaker name can be found
by looking at the list of available
devices in the Airplay menu (see
left illustration). In the illustration
to the right you can see we named
our speaker bryfi so we entered
bryfi.local in the address bar.
3
Advertisement
Table of Contents
