Table of Contents
Advertisement
Quick Start Guide
Before you begin, please make sure that you have the following available:
A computer network with 2.4GHz WiFi or Ethernet
One of the following devices:
An Apple® iPhone®, iPod®, or iPad® running iOS 7 or greater
An Android smartphone or tablet running version 4.0 or greater
A PC with WiFi adapter running Windows 7 or greater
A Mac® computer with AirPort® card running OS X® 10.7 or greater
1
2
3
4
1. Power button: To turn on the BryFi press and release the power button. To turn off the system, press the power
button briefly and the BryFi will safely shutdown in about 20 seconds. If the system should become unresponsive for
any reason, simply press and hold the power button until the green LED turns off. (This can take over 30 seconds.)
2. Analog input: An external playback device with a line or headphone output can be connected to the BryFi system
using this 3.5mm stereo input jack. To select the analog input, click on the gear icon in the top right corner of the web
interface and click the check box beside analog input.
3. Analog volume control: Use this control to adjust the volume of an external analog source. Note that this control will
not function with digital file playback via AirPlay, UPnP, or local digital music files.
4. Status Lights: See page 2 for a full description of the status light indicators.
5. USB ports: Can be used to attach external USB thumb drives for music playback. Note that one USB port is
populated with a WiFi adapter. Do not remove or change the location of this device.
6. Ethernet port: Can be used to connect to a wired LAN.
7. Power Input: Plug the round connector from the supplied power brick into this jack . The flat side should be facing
up.
8. Sub Out: 3.5mm output jack to connect an external subwoofer. A 3.5mm to RCA cable may be necessary depending
on subwoofer.
9. Analog input: An external playback device with a line or headphone output can be connected to the BryFi system
using this 3.5mm stereo input jack. To select the analog input, click on the gear icon in the top right corner of the web
interface and click the check box beside analog input.
Getting Started
5
6
Controls and Connections
7
8
9
1
Advertisement
Table of Contents
