Table of Contents
Advertisement
Your BryFi contains a computer, and computers need to be shut down properly. When you're finished listening to your BryFi
and wish to turn it off, simply press the white power button. After approximately 20 seconds the green power LED will turn off,
indicating the system has turned off.
Note: Avoid unplugging your BryFi before shutting it down as shown above.
Best Locations for your BryFi
-
Place your BryFi in an open area where there are few obstructions and away from metallic surfaces.
-
Avoid placing your BryFi behind furniture or inside cabinets.
-
Avoid placing your BryFi near microwave ovens, cordless phones, or other sources of electrical or radio interference.
Problems and Solutions
If you experience dropouts or stuttering:
-
Try locating your BryFi and/or the device you are using to play music closer to your WiFi router.
-
Check to see if any devices are being used that could be creating interference (microwave ovens, cordless phones, etc.).
-
Check to see if your WiFi network is under high usage.
-
Prioritize your BryFi in your router settings (check with your router manufacturer for details).
-
Add a WiFi repeater to extend WiFi signal coverage.
If your BryFi isn't responding or cannot be seen from your devices:
-
Press the white power button once and wait until the green light extinguishes. Press the power button again to re-start.
-
If the green light fails to extinguish above, press and hold the white power button until the green light extinguishes (approx.
20 seconds). Press the power button again to re-start.
To update your BryFi software:
-
Open a web browser and enter BryFi.local/ in the address bar (or name.local/ if you have renamed your BryFi). On
Android devices, open the BryFi app.
-
In the top right corner of the page, tap or click on the gear icon. In the menu pop-up, select System.
-
Tap or click on Check Updates. If an update is available, follow the prompts to update your system.
To reset your BryFi to its factory settings:
-
Open a web browser and enter BryFi.local/ in the address bar (or name.local/ if you have renamed your BryFi). On
Android devices, open the BryFi app.
-
In the top right corner of the page, tap or click on the gear icon. In the menu pop-up, select System.
-
Tap or click on Factory Settings and follow the prompts.
8
Turning Off Your BryFi
Tips and Troubleshooting
Advertisement
Table of Contents
