Configuring The Ea360 - Huawei eA360 Series User Manual

CPE eA360 Series
User Guide
The Web management page of the eA360 is based on the network browser. It allows you to
use the browser to easily set, configure, and manage devices.
Prerequisites



Procedure
Step 1 Start the IE browser, enter http://192.168.1.1 in the address bar, and press Enter. Connect the
eA360 from the near end using the Web management page.
Step 2 Log in to the web management page with User name set to default value admin and
Password set to default value 4GCPE@hw.
Step 3 Choose System > Password Modification to modify the New Password.
----End
Issue 01 (2014-07-30)
4
The deployment on the network side is complete.The computer has been connected to
the eA360.
The installation of the eA360 is complete.
The eA360 starts correctly based on default parameters during power-on.
Use Internet Explorer 7 (IE7) or later versions.
Use the default values of other parameters. To change the default settings, contact technical support
engineers for help.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

Configuring the eA360

4 Configuring the eA360
26