Huawei eA360 Series User Manual page 25

CPE eA360 Series
User Guide
Figure 3-16 Install crystal connector
When making PoE network cables, follow the international standard EIA/TIA568A or EIA/TIA568A to
arrange the cables. Make sure that the two ends of each network cable use the same standard.
Step 2 Connect the PoE network cable.
1.
Issue 01 (2014-07-30)
Diassemble the PG-head screw cap and air-proof block on the PoE port, and pass the
network cable through them, as shown in Figure 3-17.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation
21