Installation Procedure; Mounting On A Utility Pole - Huawei eA360 Series User Manual

CPE eA360 Series
User Guide
Table 3-1 Installation tools
Hammer drill
Heat gun
Claw hammer
Power cable crimping tool
Vise
Measuring tape

3.2 Installation Procedure

3.2.1 Mounting on a Utility Pole

Prerequisites
The eA360 and mounting components are ready, as shown in Figure 3-1 and Table 3-2.
Issue 01 (2014-07-30)
ESD gloves
Phillips screwdriver
(M3–M6)
Utility knife
Cable cutter
Hex key (M5,M6)
Multimeter
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Installation
Vacuum cleaner
Flat-head screwdriver
(M3–M6)
Wire stripper
Adjustable wrench (open end
≥32 mm)
Phillips torque screwdriver
Marker (diameter ≤ 10 mm)
11