Fault Codes - Thermador Pro Harmony PRL364GDH/01 Service Manual

5

FAULT CODES

When a fault is detected, this appliance will display a fault code
(see Figure 20, on page 18). The fault codes are represented by the
manner in which two blue LED indicators are blinking.
Depending on the range model, the blue LEDs that blink are located
either horizontally or vertically on the control panel. The horizontal
positioned blue LEDs (see Figure 17 and Figure 18) will first blink on
the left and then the right, and the vertical positioned blue LEDs (see
Figure 19) will first blink on the top and then the bottom.
For example, if the first LED blinks 4 consecutive times followed
immediately by the second LED blinking 3 times, that represents a
fault code of 43 on the chart (see Figure 20, on page 18).
Figure 17: Two Horizontal LED Indicators
58300000154022_ARA_EN_D
Service Manual for the Thermador Pro Harmony Range, Model PRL364GDH/01
Figure 18: Three Horizontal LED Indicators (Only Blue LEDs Blink)
Figure 19: Two Vertical LED Indicators
Page 17 of 68