Verifying the host recognizes array devices
1. Log into the host as an administrator.
2. View the hardware listed in the Device Manager as described in the
following steps.
3. Right-click on the My Computer desktop icon, and click Manage.
4. Click Device Manager.
5. Click SCSI and RAID Controllers.
6. Click the host bus adapter to open it, and verify all devices are displayed.
7. Click each device, click Properties, and then click Settings.
8. Record the device information on the worksheet in Appendix A.
30
HP StorageWorks Disk Array XP Operating System Configuration Guide: Windows 2000/2003