Installation
Fabric and connection parameter settings
Set each array port to FABRIC ON or OFF with connections of
POINT-TO-POINT or FC-AL as shown in the following table and figures.
For detailed topology information, refer to the HP StorageWorks SAN
Design Reference Guide on the
Fabric
Connection
Parameter
Parameter
OFF
FC-AL
ON
FC-AL
ON
POINT-TO-POINT
OFF
POINT-TO-POINT
hp.com
website.
Provides
NL-port (private arbitrated loop)
NL-port (public loop) for loop
connection to a switch
N-port (fabric port) for connection to
a switch
Not supported
23