Table of Contents
Advertisement
BIOS Utilities
Local Bus IDE adapter: (Advanced Menu)
This item allows you to configure the IDE bus which controls the hard disk and op-
tical devices. It is set to "Both" by default.
Boot-time Diagnostic Screen: (Advanced Menu)
Use this menu item to enable/disable the Boot-time Diagnostic Screen.
5
Legacy USB Support: (Advanced Menu)
Use this menu item to enable/disable the support for Legacy Universal Serial Bus.
USB 2.0 Enable:
This menu item can be used to enable/disable support for USB 2.0.
POST Beep Sound (Advanced Menu)
Use this menu item to enable/disable the beep as the computer starts up.
Total Graphics Memory: (Advanced Menu)
Use this menu item to set the amount of system memory to be allocated for use by
the internal graphics device. The default memory size allocated is 128MB, and this
may be adjusted to 256MB (by pressing the spacebar to adjust) if required.
Advanced Menu 5 - 9
Hide quick links:
Advertisement
Table of Contents
