Battery Status; Connect To A Computer - VTech Star Wars Stormtrooper BB-8 User Manual

If you have a timer running, it will return to the timer screen instead of
watch mode. The watch will not shut off automatically when the timer is
running.

BaTTerY sTaTUs

The remaining battery capacity will be displayed on the main menu screen.
When the battery level is low, most functions on the watch may not be
accessible, except for the clock display. It is recommended to recharge the
battery as soon as possible before further use.
If the battery level is extremely low the watch may not work. Recharge
the battery as soon as possible and set the time and date again after
recharging.

COnneCT TO a COMPUTer

FOr FIle TransFer
You can connect your VTech
Mac computer using the included micro USB cable. Once connected, you
can transfer files between the watch and your computer. Please follow
the following steps to make the connection:
• Pull up the rubber cover of the micro USB port on the side of your watch.
• Insert the micro USB cable (small end) into the micro USB port on the watch.
• Insert the larger end of the micro USB cable into a USB port on the
computer. A USB port is usually marked with this symbol
• You will see a removable drive called VTech 1942, please use this to
transfer files to and from the watch. There is another removable drive
called VT sYsTeM, which is for storage of system data and should not
be accessed by users.
note: Once the watch is connected to your computer, do not disconnect
it while transferring files. Only once you have finished transferring files
do we recommend you to eject and unplug the watch.
To avoid any potential damage to your VTech
Watch, ensure that the micro USB rubber cover is fully covering the
micro USB port of the watch whenever possible.
To back up photo or video files taken by VTech
Watch:
• Locate and open the DCIM folder in the removable drive VTech 1942.
10
star Wars Camera Watch to a PC or
® TM
star Wars
® TM
star Wars
® TM
.
Camera
Camera