Troubleshooting - VTech Star Wars Stormtrooper BB-8 User Manual

TrOUBlesHOOTInG

Go through this section if you experience difficulty in operating VTech
star Wars Camera Watch.
TM
Problem
The watch
has stopped
working
Screen display
is abnormal
Image taken is
not clear
Cannot
connect to
computer
Solution
1. Turn the MASTER POWER SWITCH OFF for 30
seconds.
2. Turn the MASTER POWER SWITCH ON again and
then press the HOME BUTTON to activate the
watch. It should now work properly.
3. If it doesn't work, recharge the battery and try
again.
(Refer to the battery recharging section for details)
1. Turn the MASTER POWER SWITCH OFF for 30
seconds.
2. Turn the MASTER POWER SWITCH ON again and
then press the HOME BUTTON o activate the
watch. The screen display should be normal again.
1. Make sure the lighting conditions of the shooting
environment are good.
2. Check to see if the camera lens is clean. If you find
some dirt on it, please see the steps to clean the
lens in Care and Maintenance.
• Check the connections on the USB cable between
the watch and the computer and review the
appropriate connection procedures in this manual.
• Turn the MASTER POWER SWITCH OFF for 30
seconds.
• Turn the MASTER POWER SWITCH ON and connect
to the computer again.
®
21