Advertisement
Quick Links
W-500A, W-1000A,
W-2000A & W-2000H
U l t rasonic Occupancy Sensors
SPECIFICATIONS
Voltage
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24VDC
Power Supply . . . . . . . . . . . . . . .
Watt Stopper Power Packs
Current Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . .16mA
Sensitivity Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . .1- 10
Time Adjustment . . . . . . . . . . . . . . .15 seconds. to 15 minutes
Advertisement
Related Manuals for Watt Stopper W-500A
Summary of Contents for Watt Stopper W-500A
- Page 1 Power Supply ....Watt Stopper Power Packs Current Consumption ......16mA Sensitivity Adjustment .
- Page 2 Watt Stopper sensors then control lighting systems through Watt Stopper power and auxiliary relay packs. Placement of the sensor is critical for proper operation. Watt Stopper sensors are volumetric sensors and sense motion in a 360 degree pattern. It is best to place the sensor so that it has a clear view of all the desktops or work surfaces within the coverage area.
-
Page 3: Unit Controls
On the W-500A model, there is only one receiver, which is on the opposite side of the by-pass pin. Always make sure this receiver is pointed toward activity area. -
Page 4: Installation
INSTALLATION CAUTION TURN THE POWER OFF AT THE CIRCUIT BREAKER BEFORE INSTALLING THE SENSOR. For normal Installation, connect: Blue wire from sensor to Blue wire from Power Pack Red wire from sensor to Red wire from Power Pack. Black wire from sensor to Black wire from Power Pack. Single sensor wiring Multiple sensor wiring Call 800.879.8585 for Technical Support... -
Page 5: Sensor Adjustment
SENSOR ADJUSTMENT WARNING DO NOT OVERTURN TRIMPOTS WHEN ADJUSTING THE SENSOR! After the unit is installed, the sensitivity should be adjusted so the lights stay on whenever the controlled area is occupied. Before starting the adjustment process, make sure office furniture is installed, lighting circuits are powered up and HVAC systems are in the overridden/ON position. -
Page 6: Ordering Information
347VAC, 60Hz, 15A Ballast WARRANTY INFORMATION Watt Stopper/Legrand warranties its products to be free of defects in materials and workmanship for a period of five (5) years. There are no obligations or liabilities on the part of Watt Stopper/Legrand for...