Table of Contents
Advertisement
EzPro710
Service Manual
Measure the dimensions W1, W2 and W3, with W3 at the haif image height,
as shown above. The distortion horizontal is defined as:
Dist-h = (W1-W3)/W3 *100%
And Dist-h = (W2-W3)/W3 * 100%
Both results should be within the absolute specification tolorance.
H3
H1
H2
Measure the dimensions H1, H2 and H3, with H3 at the haif image height,
as shown above. The distortion horizontal is defined as:
Dist – V= (H1+H2-2*H3)/ 2*H3 *100%
Service Manual
EzPro 710 6-11
Advertisement
Table of Contents
