EzPro710
Service Manual
4.2 Disassemble the Main Body Unit
Left Cover
( 70.81402.001)
Elevator Body Housing
( 70.81406.001)
1.
Pull the Elevator Body Housing Out
2.
Unscrew two screws on the bottom of the projector
3.
Unscrew two screws on the rear side projector.
4.
Push the Right Cover up, disconnect the speaker connector
from Main Board and detach the Right Cover from the Left Cover.
1
EzPro 710 4-2
4
Right Cover
( 70.81410.001)
2
Service Manual
3