Recycling; Guarantee And Support; Ordering Maintenance Products - Philips HD8652 Manual

English
30
There is not enough coffee in my
cup.
The milk does not froth.

Recycling

Guarantee and support

Ordering maintenance products

There is no water in the
internal circuit.
The cup volume has
been changed.
The brew group is dirty.
The automatic milk
frother is dirty or not
assembled or installed
correctly.
The type of milk used is
not suitable for frothing.
- This symbol means that this product shall not be disposed of with normal
household waste (2012/19/EU).
- Follow your country's rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative
consequences for the environment and human health.
If you need information or support, please visit www.saeco.com/support or
read the separate guarantee leaflet.
If you need information or support, please contact the Philips Saeco hotline
in your country. Contacts are included in the warranty booklet supplied
separately or visit www.saeco.com/support.
- Intenza+ water filter (CA6702)
- Lubricant (HD5061)
- Descaling solution (CA6700)
Air may be present in the internal circuit.
Rinse the internal circuit of the machine
by turning the control dial to the hot
water icon and letting some hot water
flow out of the machine.
Set with the memo function the cup
volume.
Clean the brew group (see chapter
'Cleaning and maintenance', section
'Cleaning the brew group').
Clean the automatic milk frother and
make sure it is correctly assembled or
installed.
Different types of milk result in different
amounts of froth and different froth
qualities. Semi-skimmed or full-fat
cow's milk give good results.