Interruption Of The Descaling Process - Philips HD8652 Manual

English
24
5 sec
5 Turn the control dial to the hot water icon.
6 Let hot water flow out of the hot water/steam wand until the 'water tank
empty' light lights up continuously.
Note: If you want to interrupt the water flow, turn the control dial back to
the coffee bean icon.To restart the water flow, turn it back to the hot
water icon.
7 Remove the drip tray, rinse it and place it back.
8 Reattach the automatic milk frother.
9 Remove the water tank and rinse it.
10 Reinstall the Intenza+ water filter (if present).
11 Fill the water tank with fresh tap water up to the MAX indication and slide
the water tank back into the machine.
12 Press the on/off button to switch off the machine.
When you switch the machine back on, it is ready for use again.

Interruption of the descaling process

If the machine gets stuck in the descaling procedure, you can press the
on/off button.This allows you to complete the descaling procedure. Follow
the steps below to make sure your machine is ready to brew coffee again.
1 Press the espresso button and cappuccino button simultaneously for
approximately 5 seconds.
2 Remove the drip tray, rinse it and place it back.
3 Remove the water tank and rinse it.
4 Fill the water tank with fresh tap water up to the MAX indication and slide
the water tank back into the machine.
5 Press the espresso button and brew a cup of espresso. Repeat this twice.
6 Turn the control dial to the hot water icon. Let hot water flow out of the
hot water/steam wand until the water tank empty light lights up
continuously.
7 Remove the drip tray, rinse it and place it back.
8 Reattach the automatic milk frother.
9 Remove the water tank and rinse it.
10 Reinstall the Intenza+ water filter (if present).
11 Fill the water tank with fresh tap water up to the MAX indication and slide
the water tank back into the machine.
12 Press the on/off button to switch off the machine.
When you switch the machine back on, it is ready for use again.