Blade Drive; Tire Size; Tire Pressure; Ghs System - Walker T23 Operator's Manual

Specifications
MODEL
TRANSMISSION (continued)
Transmission Fluid
Factory Service
Transmission Oil Capacity fl oz (L)
Transmission Cooling
Ground Travel Speed
Forward MPH (km/h)
Reverse MPH (km/h)

BLADE DRIVE

PTO Shaft
Blade Drive Clutch and Brake

TIRE SIZE

Deck Caster
Drive
Tailwheel
TIRE PRESSURE PSI (KPA)
Deck Caster Wheel*
Drive
Tailwheel
* If equipped with optional pneumatic tires
DRIVE BELTS
Engine PTO
Jackshaft Drive
Ground Drive, Micro-V
Blower (GHS Model)
SEAT
FRAME/BODY CONSTRUCTION
Frame
Body
Deck
GHS Catcher and Chutes
4
T23
Mobil 1 Synthetic Motor Oil (15W-50)
19 (0.56)
Cooling Fan Mounted on Drive Pulley
0-7 (0-11) Infinitely Variable
0-5 (0-8) Infinitely Variable
Quick Disconnect Splined Shaft with Two (2) High-Speed U-Joints
Manual Belt Tightener Clutch and Band Brake
[Stops Blades within Five (5) Seconds of Disengagement]
8 x 3.00-4 Semi-Pneumatic (Standard)
8 x 3.00-4 Pneumatic 4-Ply (Optional)
11 x 4.00-5 (Pneumatic 4-Ply, DS52, DS62, DS74 Only)
18 x 9.50-8 (Pneumatic 4-Ply, Standard)
18 x 10.50-10 (Pneumatic 4-Ply, Optional Low-Profile)
13 x 5.00-6 (Pneumatic 4-Ply, Standard Dual)
13 x 8.00-6 (Pneumatic 4-Ply, Optional Single)
20 (137)
15 (103)
20 (137)
Walker P/N 8230
Walker P/N 6250-1
Walker P/N 7248
Walker P/N 7234-2
Contour-Molded, with Nylon Backed Vinyl Cover and
Integral Foam Cushion
All Welded Unitized Steel Chassis
14 Gauge Steel
11 Gauge Steel
Molded Cross-Linked Polyethylene (High Impact Material,
UV Stabilized)