Transmission; Blade Drive; Tire Size; Tire Pressure - Walker T Series Operator's Manual Safety, Assembly, Operating, And Maintenance Instructions

Specifications
MODEL

TRANSMISSION

Manufacturer/Model
Steering
Forward Speed Control
Service Brake
Parking Brake
Neutral
Final Drive
Transmission Fluid
Factory Service
Alternate Transmission Fluid
Transmission Oil Capacity
fl oz (L)
Transmission Cooling
Ground Travel Speed
Forward MPH (km/h)
Reverse MPH (km/h)

BLADE DRIVE

PTO Shaft
Blade Drive Clutch and Brake

TIRE SIZE

Deck Caster
Drive
Tailwheel
TIRE PRESSURE PSI (KPA)
Deck Caster Wheel*
Drive
Tailwheel
* If equipped with optional pneumatic tires
4
T30i
Dual Hydrostatic, Eaton Model 7, Each Wheel Independently Driven
Hand Lever Control / Individual Wheel
Precision Friction Lock Lever, Cruise Control, with
Neutral-Park Position
Dynamic Braking through Hydrostatic Transmission
Mechanical Pin Lock in Transmission Gear
Transmission Release by Manual Dump Valve
Gear Drive Axle
Mobil 1 Synthetic Motor Oil (15W-50)
SAE 30W Straight Viscosity Motor Oil
19 (.56)
Cooling Fan Mounted on Drive Pulley
0-7 (0-11) Infinitely Variable
0-5 (0-8) Infinitely Variable
Quick Disconnect Splined Shaft with Two (2) High-Speed U-Joints
Manual Belt Tightener Clutch and Band Brake
[Stops Blades within Five (5) Seconds of Disengagement]
8 x 3.00-4 Semi-Pneumatic (Standard)
8 x 3.00-4 (Pneumatic 4-Ply) (Optional)
11 x 4.00-5 (Pneumatic 4-Ply, DS52, DS62, DS74 Only)
18 x 9.50-8 (Pneumatic 4-Ply, Standard)
18 x 10.50-10 (Pneumatic 4-Ply, Optional Low-Profile)
13 x 5.00-6 (Pneumatic 4-Ply, Standard Dual)
13 x 8.00-6 (Pneumatic 4-Ply, Optional Single)
20 (137)
15 (103)
20 (137)