Compass Calibration 0 - UBSAN X4 STAR FPV User Manual

Compass Calibration is required after the binding as instructed on the transmitter.
1 )
Horizontally rotate the X4 in a clockwise direction when the LCD screen shows "Calib compass 1"
2 ) P
ut the X4 nose down and vertically rotate it in a clockwise direction when the LCD screen shows "Calib
compass 2"
3 ) Calibration is completed when the 4 LED indicators remain solid.
Horizontally rotate the X4 in a clockwise direction
when the LCD screen shows "Calib compass 1"
START
When the quadcopter yaws during flight, please calibrate the compass manually as insturcted below:
1) Pull the left stick to the left side, and move the right stick from left to right quickly
and repeat until the transmitter displays "Calib compass1", and the 4 LED indicators blink circularly.
2) Horizontally rotate the X4 in a clockwise direction until the LCD screen shows "Calib compass 2",
and the 4 LED indicators blink alternately.
3) Put the X4 nose down and vertically rotate it in a clockwise direction until the "Calib compass 2"
disappears.
4) Calibration is completed when the 4 LED indicators remain solid.
Pull the left stick to the left side
Put the X4 nose down and vertically rotate it
lockwise direction until the "Calib compass 2" disappears.
COMPASS CALIBRATION
in a clockwise direction when the LCD screen shows "Calib compass 2"
quickly, the LCD screen displays "Calib compass 1"
Put the X4 nose down and vertically rotate it
Move the right stick left to right
Horizontally rotate the X4 in a clockwise direction
until the LCD screen shows "Calib compass 2"
COMPLETE
©
2016 Hubsan
02
哈博森科技 版权所有