Rth Mode - UBSAN X4 STAR FPV User Manual

2.) Home Point is recorded when armed the motors with no less than 6 GPS satellites.
3.) You should be in an open place to search for the GPS satellites, it'll take 3 mins to finish the
searching, and the GPS signal strength depends on the flying environment.
6.2 RTH MODE (RETURN TO HOME)
ENTER INTO RTH MODE
Push the GPS Switch and the RTH Switch up, and the quad copter will enter into RTH mode.
The flight control system will control the quad copter to fly back to the home point and land
automatically.
!
The RTH MODE only works when the GPS mode is activated with no less than 6 satellites.
The Home Point is recorded when armed the motors with no less than 6 GPS satellites.
EXIT RTH MODE
Pull down the RTH Switch, the X4 will exit the RTH Mode.
©
2016 Hubsan
14
哈博森科技 版权所有