Headless Mode; Follow Me Mode - UBSAN X4 STAR FPV User Manual

6.3 HEADLESS MODE

Headless mode means the X4
will default any directions
(corresponding to the directions
of transmitter sticks) as the up ahead
when the mode is activated.
Short press down the throttle stick to switch on/ off headless mode.
Short press down the throttle stick to enter into Headless Mode, indicated by two "beep" sounds
and the "HEADLESS ON" displays on the LCD screen.
Short press down the throttle stick again to exit Headless Mode, indicated by one "beep" sound
and the "HEADLESS OFF" displays on the LCD screen.

6.4 FOLLOW ME MODE

Follow Me Mode means the
drone follows the transmitter
automatically as it has
built-in GPS system.
Short press down the elevator stick to switch on/ off follow me mode.
Short press down the elevator stick to enter into the follow me Mode, indicated by two "beep" sounds,
the " FOLLOW ON" displays on the LCD screen, the drone will turn and face to the transmitter.
Important Notice: When the quadcopter is in follow me mode, press any sticks or trims may exit
the mode except the throttle stick.
Short press down the elevator stick again to exit follow me Mode, indicated by one "beep" sound a
nd the " FOLLOW OFF" displays on the LCD .
The follow me mode only works when the GPS (both on transmitter and on drone) has
!
no less than 6 satellites.
6.5 FAILSAFE MODE
The quad copter will enter into failsafe mode when the connection is lost from the transmitter, or
when the power is low. The flight control system will control the quad copter to return to the
HOME POINT and land automatically. The failsafe mode helps to avoid injuries or damages.
©
2016 Hubsan
15
哈博森科技 版权所有
MODE 2
MODE 2
MODE 1
MODE 1