Programmable Features - Jeep Compass User Manual

Compass Calibration
This compass is self-calibrating, which eliminates the need to set the compass
manually. When the vehicle is new, the compass may appear erratic, and the EVIC
will display "CAL" until the compass is calibrated.
You may also calibrate the compass by completing one or more 360 degree turns (in
an area free from large metal or metallic objects) until the "CAL" message displayed
in the EVIC turns off. The compass will now function normally.

PROGRAMMABLE FEATURES

Electronic Vehicle Information Center (EVIC)
The EVIC can be used to program the following Personal Settings. Push the MENU
button until Personal Settings displays, then push the DOWN Arrow button
scroll through the settings. Push the RIGHT Arrow button
• Language
• Auto Unlock On Exit
• RKE Unlock Driver's Door 1st Press
• Flash Lamps With Lock
• Sound Horn With Lock
• Headlamp Off Delay
• Key Off Power Delay
Key Fob Programmable Features
The following features may also be programmed by using the Key Fob transmitter or
the ignition and driver's door lock switch.
NOTE:
Pushing the LOCK button while you are inside the vehicle will activate the Vehicle
Security Alarm. Opening a door with the Vehicle Security Alarm activated will cause
the alarm to sound. Push the UNLOCK button to deactivate the Vehicle Security
Alarm.
Unlock On First Press
To unlock either the driver's side, or all doors, on the first push of the UNLOCK
button:
• Push and hold the LOCK button for at least four seconds, but no longer than
10 seconds. Then, push and hold the UNLOCK button while still holding the
LOCK button.
• Release both buttons at the same time.
ELECTRONICS
• Illuminated Approach
• Hill Start Assist (HSA)
• Display Units In
• Confirmation of Voice Commands
• Automatic Compass Calibration
• Compass Variance
to change the setting.
to
71