Fluke 1760 User Manual page 76

1760
Users Manual
Channel LEDs
Data memory
Memory model
Recording mode
Measurement system
Interfaces
Baud rate for RS 232
Dimensions (H x W x D)
Weight (without accessories)
Warranty
Calibration interval
Signal conditioning
Range for 50 Hz systems
Range for 60 Hz systems
Frequency Resolution
Sampling frequency for 50 Hz and 60 Hz
nominal power frequency
Uncertainty for frequency measurements
Uncertainty of internal clock
Measurement intervals
Min-Max-values
Transients
5-4
3-color LEDs per channel for:
•
overload condition
•
OK and signal level too low condition
signal level in nominal range
2 GB Flash memory
Selectable : Linear or circular
Continuous, gapless recording
4 voltages + 4 currents for 3 phases + N conductor or 8
voltages
Ethernet (100 MB/s), compatible to Windows® 2000/XP
SP3/Vista, RS 232 and USB 2.0
9600 Baud ... 115 kBaud
325 mm x 300 m x 65 mm (13 x 12 x 2.6 inch)
approximately 4.9 kg (10.8 lbs)
2 years
1 year recommended for Class-A, otherwise 2 years
Specification
50 Hz ± 15 % (42.5 Hz to 57.5 Hz)
60 Hz ± 15 % (51 Hz to 69 Hz)
16 ppm
10.24 kHz, The sampling rate is synchronized to mains
frequency.
< 20 ppm
< 1s / day
Aggregation of the interval values as per IEC 61000-4-30
Class-A
Half cycle
Sample rate 100 kHz to10 MHz per channel