About This Manual; Symbols - Fluke 1760 User Manual

About this Manual

This manual consists of several chapters.
•
Introduction
•
Getting Started
•
Operation
•
Maintenance
•
Specifications
•
Options and Accessories

Symbols

Table 1-1 shows the symbols used on the instrument and/or in this manual.
Symbol
X
W
-
J
T
B
F
P
)
~
;
CAT II
CAT III
CAT IV
Table 1-1. Symbols
Hazardous voltage. Risk of electric shock.
Important information. See manual.
Do not apply around or remove from HAZARDOUS LIVE conductors.
Earth ground.
Double insulation.
AC (Alternating Current)
DC (Direct Current).
Conforms to requirements of European Union.
Canadian Standards Association is the certified body used for testing
compliance to safety standards.
Do not dispose of this product as unsorted municipal waste. Go to Fluke's
website for recycling information.
Conforms to relevant Australian Standards.
IEC Overvoltage Category/Measurement Category II equipment is designed
to be protected against transients from socket outlets and similar points.
IEC Overvoltage Category III equipment is designed to protect against
transients in installations, such as distribution panels, feeders and short
branch circuits, and lighting systems in large buildings.
IEC Overvoltage Category IV equipment is designed to protect against
transients from the primary supply level, such as an electricity meter or an
overhead or underground utility service.
Description
Introduction
1

About this Manual

1-3