Chapter 3 Login And System Status; Login; Preparation; Connecting To Ade-3000 - Planet ADE-3000 User Manual

Adsl bridge router

Hide thumbs Also See for ADE-3000:

Table of Contents

ADE-3000 User Manual

Chapter 3

This Chapter details the first time login procedure and the Status

screen

ADE-3000 contains an HTTP server. This enables you to connect to it, and configure it,

using your Web Browser. Your Browser must have JavaScript support. The

configuration program has been tested on the following browsers:

Netscape V4.08 or later

Internet Explorer V4 or later

Before attempting to configure ADE-3000, please ensure that:

Your PC can establish a physical connection to ADE-3000. The PC and ADE-3000

must be directly connected (using the ETHERNET port on ADE-3000) or on the

same LAN segment.

ADE-3000 must be installed and powered ON.

If ADE-3000's default IP Address (10.0.0.2) is already used by another device, the

other device must be turned OFF until ADE-3000 is allocated a new IP Address

during configuration.

To establish a connection from your PC to ADE-3000:

1. After installing ADE-3000 in your LAN, start your PC. If your PC is already running,

restart it.

2. Start your WEB browser.

3. In the Address box, enter "HTTP://" and the IP Address of ADE-3000, as in this

example, which uses ADE-3000's default IP Address:

http://10.0.0.2

4. If connection is established, a pop-up password request page will show up. The

default login User Name of ADE-3000 administrator is "admin", and Password is

"conexant". The default login User Name for non-administrator is "user", and

Password is "password".

Table of Contents