Fiat 500 2016 User Manual page 17

Hide thumbs Also See for 500 2016:
Table of Contents

Advertisement

Enhanced Accident Response System Reset Procedure
After the event occurs, when the system is active, a message regarding fuel cutoff is dis-
played. Turn the ignition switch from ignition AVV or MAR to ignition STOP. Carefully
check the vehicle for fuel leaks in the engine compartment and on the ground near the
engine compartment and fuel tank before resetting the system and starting the engine.
Depending on the nature of the event the left and right turn signal lights, located in the
instrument panel, may both be blinking and will continue to blink. In order to move your
vehicle to the side of the road, you must follow the system reset procedure.
Customer Action
1. Turn Ignition STOP. (Turn Signal Switch
Must Be Placed In Neutral State).
2. Turn Ignition MAR.
3. Turn Right Turn Signal Switch ON.
4. Turn Left Turn Signal Switch ON.
5. Turn Right Turn Signal Switch ON.
6. Turn Left Turn Signal Switch ON.
7. Turn Left Turn Signal Switch OFF. (Turn
Signal Switch Must Be Placed In Neutral
State).
8. Turn Ignition STOP.
9. Turn Hazard Flashers OFF (Manually).
If a reset procedure step is not completed within 60 seconds, then the turn signal lights
will blink and the reset procedure must be performed again in order to be successful.
Air Bag Warning Light
The air bags must be ready to inflate for your protection in a collision. The Occupant
Restraint Controller (ORC) monitors the internal circuits and interconnecting wiring asso-
ciated with air bag system electrical components.
The ORC monitors the readiness of the electronic parts of the air bag system whenever
the ignition switch is in the AVV or MAR position. If the ignition switch is in the STOP
position the air bag system is not on and the air bags will not inflate.
GETTING STARTED
Customer Will See
Left Turn Light Is OFF. Right Turn Light
BLINKS.
Right Turn Light Is ON SOLID. Left Turn
Light BLINKS.
Left Turn Light Is ON SOLID. Right Turn
Signal Light BLINKS.
Right Turn Light Is ON SOLID. Left Turn
Light BLINKS.
Left Turn Light Is ON SOLID. Right Turn
Light Is ON SOLID.
Left Turn light Is OFF. Right Turn Light is
OFF.
System is now reset and the engine may
be started.
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

500c 2016

Table of Contents