Care & Cleaning; Storing The Vacuum Cleaner; Dust Tank Components - LG LuV300 Owner's Manual

Always follow all safety precautions when cleaning and servicing the vacuum cleaner.

Storing the Vacuum Cleaner

When not in use, wrap the cord around the
cord hanger, as shown. Store the crevice tool
in their proper places on the back of the
vacuum cleaner.
WARNING
Electrical shock and personal injury
hazard.
Take care when wrapping the cord.
Wrapping the cord too tightly puts
stress on the cord and can cause cord
damage. Do not criss-cross when
wrapping the cord. A damaged cord is
an electrical shock hazard and could
cause personal injury or damage.
CARE & CLEANING

Dust Tank Components

The dust tank consists of several key
components. Always make sure that all parts are
properly reinstalled after emptying the dust tank.
NEVER operate the vacuum cleaner
without all filters in place!
NEVER operate the vacuum cleaner with
wet filters or components!
Key components:
1~2. Foam pre filter: Captures medium to
fine particles. It consists of Filter frame &
Foam filter. These are washable.
3. Dust tank lid: Open to access Foam pre
filter.
4. Dust separator: Capture dust and medium
particles.
5. Side door: Open to remove dirt from dust
separator.
6. Emptying dirt release: Press down to
open the bottom plate.
7. Dust tank: where dirt is collected.
8. Bottom plate: Open to empty the dust tank.
1. Filter
frame
2. Foam
filter
4. Dust
separator
8. Bottom
plate
-16-
3. Dust
tank lid
5. Side
door
6. Emptying
dirt release
7. Dust tank