Wand & Hose Assembly; Attaching The Hose - LG LuV300 Owner's Manual

Wand & Hose assembly
1. Remove Cover by sliding up.
2. Insert the 2 "AAA" batteries.
3. Insert the Pet hair tool into the bottom of
the wand.
4. Insert the dusting brush onto the other side
of the wand.
5. Insert the handle onto the open end of the
dusting brush.

Attaching the Hose

1. Attach the top side of the hose to the
handle. The top side of the hose can be
recognized because is has 2 clips for
releasing.
2. Insert the bottom side of the hose to the
main body. The bottom side of the hose
can be recognized because it only has
1 clip to release.
Note: When inserting the bottom of the hose
to the main body the clip should be on the
side closest to the floor and centered.
3. Inset the wand with all accessories attached
into the main body of the vacuum cleaner.
-8-