Care & Cleaning; 3 Storing The Vacuum Cleaner; 3 Dust Tank Components - LG LuV350P Series Owner's Manual

Kompressor drive pet care upright vacuum cleaner
Hide thumbs Also See for LuV350P Series:
Table of Contents

Advertisement

Available languages

Available languages

Always follow all safety precautions when cleaning and servicing the vacuum cleaner.
Storing the Vacuum Cleaner
When not in use, wrap the cord around the cord hanger as shown. The
hose can be wrapped around the handle/wand if the wand is being
stored un-extended. Store the dusting brush/crevice tool in its proper
place on the left of the vacuum cleaner.
WARNING
y Electrical shock and personal injury hazard.
y Take care when wrapping the cord. Wrapping the cord too tightly
puts stress on the cord and can cause cord damage. Do not
crisscross when wrapping the cord. A damaged cord could cause
an electrical shock hazard, personal injury or damage.
Dust Tank Components
The dust tank consists of several key components. Always make sure that
all parts are properly reinstalled after emptying the dust tank.
NEVER operate the vacuum cleaner without all filters in place.
NEVER operate the vacuum cleaner with wet filters or components.
Key components:
1. Filter frame and foam filter:
Captures medium to fine particles. It consists of Filter frame &
Foam filter. These are washable.
2. Foam filter
3. Dust tank lid: Open to access the foam filter.
4. Dust separator: Separates dust from air coming in.
5. Side door: Open to remove dirt from the dust separator.
6. Prevention tab: Prevents the lid from closing without a foam filter
installed.
7. Dust tank: Where dirt is collected.
8. Bottom plate: Open to empty the dust tank.
1. Filter frame
2. Foam filter
4. Dust separator
8. Bottom plate
13
CARE & CLEANING
3. Dust tank
lid
6. Prevention
Tab
5. Side door
7. Dust tank

Advertisement

Table of Contents
loading

Table of Contents