Care & Cleaning; Storing The Vacuum Cleaner; Dust Tank Components - LG LUV400T Owner's Manual

CARE & CLEANING
Always follow all safety precautions when cleaning and servicing the vacuum cleaner.

Storing the Vacuum Cleaner

When not in use, wrap the cord around the cord
hanger as shown. Store the crevice tool in their
proper places on the back of the vacuum cleaner.
WARNING
Electrical shock and personal injury hazard.
Take care when wrapping the cord. Wrapping
the cord too tightly puts stress on the cord
and can cause cord damage. Do not criss-
cross when wrapping the cord. A damaged
cord makes an electrical shock hazard and
could cause personal injury or damage.
16

Dust Tank Components

The dust tank consists of several key components.
Always make sure that all parts are properly
reinstalled after emptying the dust tank.
NEVER operate the vacuum cleaner without all
filters in place!
NEVER operate the vacuum cleaner with wet
filters or components!
Key components:
1~2. Foam pre filter: Captures medium to fine
particles. It consists of Filter frame & Foam
filter. These are washable.
3. Dust tank lid: Open to access Foam pre filter.
4. Dust separator: Separate dust from air coming
in.
5. Side door: Open to remove dirt from dust
separator.
6. Emptying dirt release: Press down to open the
bottom plate.
7. Dust tank: where dirt is collected.
8. Bottom plate: Open to empty the dust tank.
9. Prevention Lever: Prevent using without Foam
pre filter.
1. Filter
frame
2. Foam
filter
4. Dust
separator
8. Bottom
plate
3. Dust
tank lid
9. prevention
Lever
5. Side
door
6. Emptying
dirt release
7. Dust tank