Table 3-4 Parts Supplied For A Gma 245 Backshell Installation (Figure 3-2); Table 3-5 Parts Not Supplied For A Backshell Installation (Figure 3-1) - Garmin GMA 245 Installation Manual

The items listed in Table 3-4 are provided in the GMA 245 Connector Kit
Table 3-4 Parts supplied for a GMA 245 Backshell Installation
Item #
1 Cast Backshell Housing
6 Contact Pin, Mil Crimp, Size 22D
8 Screw,8-32x.312,PHP,SS/P
9 Wshr,Split Lock,Size 8
10 Wshr,Flat,Non-Std,SS,ID.195,OD.354
12 Clamp
13 Screw,4-40x.375,PHP,SS/P,w/Nylon
14 Cover
15 Screw,4-40x.375,PHP,SS/P,w/Nylon
16 Hi Density D-Sub Connector, Mil Crimp, 44 ckt
17* Screw,4-40x.250,FLHP100,SS/P
18* Adapter, Ring Terminal, Shell SZ 1,2
19* Screw,4-40x.437,FLHP100, SS/P,Nylon
*GMA 245 Shield Block Backshell only
Table 3-5 Parts not supplied for a Backshell Installation
Item #
Multiple Conductor Shielded Cable (2-conductor shown in
2
Figure 3-1)
3 Drain Wire Shield Termination (method optional)
Braid, Flat (19-20 AWG equivalent, tinned plated copper strands
4
36 AWG, Circular Mil Area 1000 -1300)
5 Floating Shield Termination (method optional)
Ring terminal, #8, insulated, 18-22 AWG
7 Ring terminal, #8, insulated, 14-16 AWG
Ring terminal, #8, insulated, 10-12 AWG
11 Silicon Fusion Tape
NOTE
In Figure 3-1, "AR" denotes quantity "As Required" for the particular installation.
190-01879-11
Rev. 6
Description
Description
(Table 2-5 and Table
(Figure
GPN
125-00083-00
336-00021-00
211-60209-09
212-00018-04
212-20065-00
115-00499-02
211-60234-10
115-00500-02
211-63234-06
330-00185-44
211-63234-08
117-00147-00
211-63234-11
(Figure 3-1)
GPN or MIL spec
Parts used depend on
method chosen
Parts used depend on
method chosen
Parts used depend on
method chosen
Parts used depend on
method chosen
MS25036-149
MS25036-153
MS25036-156
GMA 245/245R Installation Manual
2-6).
3-2)
-
Page 3-3