To Remove The Memory Card - Sony CYBER-SHOT DSC-TX5 Instruction Manual

Digital still camera
Hide thumbs Also See for CYBER-SHOT DSC-TX5:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
x
Memory card that you can use
The following memory cards are compatible with this camera: "Memory Stick
PRO Duo" media, "Memory Stick PRO-HG Duo" media, "Memory Stick
Duo" media, SD memory card, SDHC memory card and SDXC memory card.
However, all memory cards are not guaranteed to work with this camera.
MultiMediaCard is not compatible.
Images recorded on an SDXC memory card cannot be transferred or played
back on computers or AV devices that are not exFAT-compatible, even when
the camera is connected to the computer or AV device using a USB cable.
Before connecting, make sure that the device is exFAT-compatible. If
connected to a device that is not exFAT-compatible, a format drive request
may appear. Do not format the drive, or all data will be lost. (exFAT is the file
system used by SDXC memory cards.)
• In this manual, the term "Memory Stick Duo" media is used to refer to "Memory
Stick PRO Duo" media, "Memory Stick PRO-HG Duo" media and "Memory
Stick Duo" media, and the term "SD card" is used to refer to SD memory card,
SDHC memory card and SDXC memory card.
• When recording movies, it is recommended that you use the following memory
cards:
– SD memory card, SDHC memory card or SDXC memory card (Class 4 or faster)
Note
• This camera should be operated at between –10°C and +40°C, but according to the
type of memory card, the operating temperature may vary. For details, see the
operating instructions supplied with the memory card.
For details on the number of images/time that can be recorded, see page 27.
x

To remove the memory card

Note
• Never remove the memory card/the battery pack when the access lamp is lit. This
GB
may cause damage to data or the memory card.
18
(Mark2) ("Memory Stick PRO Duo" (Mark2) media)
("Memory Stick PRO-HG Duo" media)
Access lamp
Make sure that the access lamp is not lit,
then push the memory card in once.

Advertisement

Table of Contents
loading

Table of Contents