1. Manuals
  2. Brands
  3. AXIOMTEK Manuals
  4. Digital Signage
  5. OPS885 Series
  6. User manual

AXIOMTEK OPS885 Series User Manual

Intel open pluggable specification box
Hide thumbs Also See for OPS885 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
OPS885 Series
Intel Open Pluggable Specification
Box
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OPS885 Series and is the answer not in the manual?

Questions and answers

Related Manuals for AXIOMTEK OPS885 Series

Summary of Contents for AXIOMTEK OPS885 Series

  • Page 1 OPS885 Series Intel Open Pluggable Specification User’s Manual...

  • Page 2: Disclaimers

    Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice.

  • Page 3: Safety Approvals

    Safety Approvals CE Marking  FCC Class A  FCC Compliance This equipment has been tested in compliance with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are meant to provide reasonable protection against harmful interference in a residential installation.

  • Page 4: Safety Precautions

    Safety Precautions Before getting started, please read the following important safety precautions. The OPS885 series does not come equipped with an operating system. An operating system must be loaded first before installing any software into the computer. Be sure to ground yourself to prevent static charge when installing the internal components.

  • Page 5: Table Of Contents

    Table of Contents Disclaimers ......................ii Safety Approvals ....................iii Safety Precautions ....................iv CHAPTER 1 INTRODUCTION ................ 1 General Description ................1 System Specifications ................ 2 1.2.1 Main CPU Board ....................2 1.2.2 I/O System ......................2 Mechanical Assembly ................. 4 1.3.1 Dimensions ......................
  • Page 6 3.1.6 HDMI Connector (CN8) ................... 30 3.1.7 Reset Button (CN9) ..................30 3.1.8 CPU FAN (CN12) ..................... 30 3.1.9 mSATA Slot (SCN2) ..................31 3.1.10 Mini Card Slot 2 Connector(SCN4)..............32 3.1.11 Audio Mic-In Connector(SCN5) ..............32 3.1.12 Audio Line-Out Connector (SCN6) ..............33 3.1.13 Battery 2 Pin (BAT1) ..................
  • Page 7 APPENDIX B Trusted Platform Module (TPM) Installation ....... 63 Trusted Platform Module Installation .............. 63 APPENDIX C WATCHDOG TIMER .............. 69 APPENDIX D iAMT SETTINGS ..............71 C.1 Entering MEBx ................71 C.2 Set & Change Password ............72 C.3 Intel® iAMT Settings ..............73 C.4 iAMT Web Console ..............
  • Page 8 This page is intentionally left blank. viii...

  • Page 9: Chapter 1 Introduction

    Easy maintenance OPS885 series offers a best solution for digital signage market. Compliant with Intel OPS architecture, digital signage players are capable of deploying interchangeable systems faster and easing upgrading/maintenance, while lowering costs for development and implementation.

  • Page 10: System Specifications

    OPS885 User’s Manual System Specifications 1.2.1 Main CPU Board   The OPS885 series has four reference solutions as BGA type with 4 generation Intel® Core™ i5 Processor onboard  System Chipset  Intel® QM87 PCH  BIOS  AMI® BIOS ...
  • Page 11 OPS885 User’s Manual  Dimension (Main Body Size)  200 mm x 119 mm(D) x 30 mm(H)  Operation Temperature  0℃ to 45℃ (with airflow 1.2 m/s) NOTE: All specifications and images are subject to change without notice. Introduction...

  • Page 12: Mechanical Assembly

    30mm and also shows the location of the front panel screw holes as well as the security lock. While plugging the OPS module, please make sure the heat sink side of OPS module toward the outside. Axiomtek will be out of reasonability if there is any damage occurred due to it.

  • Page 13: I/O Outlet

    OPS885 User’s Manual 1.3.2 I/O outlet The following figures show you the locations of the OPS885 series I/O outlets. Connector Connector JAE TX-25 HDD indicator USB 3.0 x2 Audio(Line-out) Ethernet Audio(Mic.-in) HDMI Output RS-232 Power Switch USB 2.0 Reset Optional Antenna...

  • Page 14: Mechanical Specifications

    OPS885 User’s Manual 1.3.3 Mechanical Specifications OPS885 series is docked in the reference display panel The OPS885 Pluggable Module docked at a display panel system. In this reference design, the module is docked and undocked in the vertical direction. NOTE: Please contact Axiomtek for available option display panel.
  • Page 15 The Guide Rail Mechanism for the OPS885 series Module You can use the rails alongside of OPS885 series Module to dock and undock the plug connector at the back of the module to connect with docking board. There are two lock pins on each side of the rail which serve as the locking mechanism to attach the lock holes on the series module.
  • Page 16 OPS885 User’s Manual Location of Lock Hole on the Pluggable Module *The drawing is base on Intel Open Pluggable Specification Introduction...
  • Page 17 OPS885 User’s Manual Dimensions of the Guide Rail Introduction...
  • Page 18 Vent Holes at the Pluggable Module Back Panel On the OPS885 series module, it is recommended by Intel that some vent holes be opened at the back so that hot air can escape more easily from the module that the FAR in on both sides of the module back panel should be greater than 0.25.

  • Page 19: Reference Design

    Reference Design Display Panel Rear View – Internal The digital signage OPS885 series prototype is based on a 32” display panel with the functional blocks illustrated. It is mainly a 3-board partitioning design consisting of the pluggable module, docking board and the panel control board.

  • Page 20: Package List

    Thermal Pad x 2  M2 x 3 screw x 2  M3 x 4 screw x 2  M4 x 10 screw x 2 If you cannot find the package or any items are missing, please contact Axiomtek distributors immediately. Introduction...

  • Page 21: Chapter 2 Hardware Installation

     Pluggable Module Method Storage, DRAM,Wireless & 3G module Installation The OPS885 series model offers a convenient drive bay module for users to install Storage, DRAM, wireless & 3G module. Please follow the steps: Step 1 Turn off the system, Loosen the screws as illustrated.
  • Page 22 OPS885 User’s Manual NOTE: Please pull out power cable of system fan while installation Hardware Installation...
  • Page 23 DIMM. Step 3 Install mSATA The OPS885 series provides one Mini card slot for user to install mSATA. When please refer to the following instructions and illustration Loosen the screws per illustrated.
  • Page 24 OPS885 User’s Manual Put thermal pad on the M/B, and tear off the blue plastic sheet Install mSATA module. Place the mSATA module into the socket and press it firmly down until it is fully located. Hardware Installation...
  • Page 25 OPS885 User’s Manual Affix another thermal pad on the mSATA Hardware Installation...
  • Page 26 OPS885 User’s Manual Step 4 Install Wireless Modules The OPS885 series provides two Mini card slot for user to install one wireless LAN card. When installing the wireless LAN card, refer to the following instructions and illustration Please refer to loosen the screws of the chassis and PCB board, place wireless...
  • Page 27 OPS885 User’s Manual Please loosen the screws of the chassis and PCB board. Turn the PCB board per illustrated Find the Antenna cable and connect it wireless LAN card. Screw the antenna connector at expansion I/O side and Install the antenna on the wireless LAN card The wireless Module with one antenna application : Hardware Installation...
  • Page 28 OPS885 User’s Manual The wireless Module with two antennas application : Hardware Installation...
  • Page 29 Step 5 Install 3G module The OPS885 series provides one Mini card slot for user to install one 3G module. When installing the 3G module, refer to the following instructions and illustration After following the step 1, please loosen the screws of the chassis and PCB board.
  • Page 30 OPS885 User’s Manual Install 3G module. Place the 3G module into the socket and press it firmly down until it is fully located. Affix the screws per illustrated Hardware Installation...
  • Page 31 OPS885 User’s Manual You may also install wireless LAN card at this socket. NOTE: Hardware Installation...

  • Page 32: Pluggble Module Method

    Step 1 Pluggable the box into display Caution: When plugging OPS885 into an OPS display, make sure the module’s heat sink is facing outside of the display. Axiomtek is not responsible for any damage caused by wrong installation Step 2...

  • Page 33: Chapter 3 Connectors

    OPS885 User’s Manual CHAPTER 3 CONNECTORS This chapter provides users with detailed description how to set up basic system configuration through the AMIBIOS8 BIOS setup utility. Connectors Connectors connect this board with other parts of the system. Loose or improper connection might cause problems.
  • Page 34 OPS885 User’s Manual Connectors...

  • Page 35: Jae Tx25 Connector (Cn1)

    OPS885 User’s Manual 3.1.1 JAE TX25 Connector (CN1) Connector JAE TX25 CN1 is for JAE interface support. Signal Signal Signal Signal 1 DDP_3N DDP_3P DDP_2N 5 DDP_2P DDP_1N DDP_1P 10 DDP_0N 11 DDP_0P 12 GND 9 GND 13 DDP_AUXN 14 DDP_AUXP 15 DDP_HPD 16 GND 17 TMDS_CLK-...

  • Page 36: Mini Card Slot (Cn3)

    OPS885 User’s Manual 3.1.2 Mini Card Slot (CN3) Signal Signal Signal WAKE# +3.3VAUX RVD1 RVD2 +1.5V CLKREQ# SIM Card_Power SIM Card_I/O REFCLK- SIM Card_CLK REFCLK+ SIM Card_RST- SIM Card_VPP RVD3 RVD4 +3.3VAUX PERST# PERN0 +3.3VAUX PERP0 +1.5V SMB_CLK PETN0 SMB_DATA PETP0 USB_D- RVD5...

  • Page 37: Sim Slot (Cn4)

    OPS885 User’s Manual 3.1.3 Sim Slot (CN4) Signal SIM_PWR SIM_RESET SIM_CLK SIM_DATA SIM_I/O 3.1.4 USB2.0 Port9 (CN6) Signal USB D- USB D+ 3.1.5 Power Button(CN7) Signal PWRBTN- PWRBTN- 5VSB Connectors...

  • Page 38: Hdmi Connector (Cn8)

    OPS885 User’s Manual 3.1.6 HDMI Connector (CN8) The HDMI (High-Definition Multimedia Interface) is a compact digital interface which is capable of transmitting high-definition video and high-resolution audio over a single cable. Its interface is available through connector CN8. Signal Signal HDMI OUT_DATA2+ HDMI OUT_DATA2- HDMI OUT_DATA1+...

  • Page 39: Msata Slot (Scn2)

    OPS885 User’s Manual 3.1.9 mSATA Slot (SCN2 Signal Signal Signal Signal +3.3VAUX 3 RVD1 RVD2 +1.5V 7 CLKREQ# RVD19 11 REFCLK 10 RVD18 12 RVD16 13 REFCLK+ 14 RVD15 15 GND 16 RVD14 17 RVD3 18 GND 19 RVD4 20 +3.3VAUX 21 GND 22 PERST# 23 m-SATA RXP...

  • Page 40: Mini Card Slot 2 Connector(Scn4)

    OPS885 User’s Manual 3.1.10 Mini Card Slot 2 Connector(SCN4) Signal Signal Signal Signal WAKE# +3.3VAUX 3 RVD1 RVD2 +1.5V 7 CLKREQ# RVD19 10 RVD18 11 REFCLK- RVD16 13 REFCLK+ 14 RVD15 15 GND RVD14 17 RVD3 18 GND 19 RVD4 +3.3VAUX 21 GND 22 PERST#...

  • Page 41: Audio Line-Out Connector (Scn6)

    OPS885 User’s Manual 3.1.12 Audio Line-Out Connector (SCN6) Signal LINE_OUT_R LINE_OUT_L LINE_OUT_DETECT 3.1.13 Battery 2 Pin (BAT1) Signal +VBAT 3.1.14 ATX Auto Power ON/ Clear CMOS (SSW1-Pin4) AT or ATX Select (SSW 1- Pin1 & Pin4) Description Settings OFF (Default) Clear CMOS (SSW1- Pin2 &...

  • Page 42: Rj45 (I217Lm) (Lan1)

    OPS885 User’s Manual 3.1.15 RJ45 (I217LM) (LAN1) The RJ-45 connector LAN1 is for Ethernet. To connect the board to 100-Base-T or 1000-Base-T hub, just plug one end of the cable into LAN1 and connect the other end (phone jack) to a 100-Base-T hub or 1000-Base-T hub. Signal Tx+ (Data transmission positive) Tx- (Data transmission negative)

  • Page 43: Com Port (Com2)

    OPS885 User’s Manual 3.1.17 COM Port (COM2) The COM Port connector is a standard DB-9 connector. The pin assignment of RS- 232 is listed on the following table Signal DCD, Data carrier detect RXD, Receive data TXD, Transmit data DTR, Data terminal ready GND, ground DSR, Data set ready RTS, Request to send...
  • Page 44 OPS885 User’s Manual This page is intentionally left blank. Connectors...

  • Page 45: Chapter 4 Drivers Installation

    OPS885 User’s Manual CHAPTER 4 DRIVERS INSTALLATION System OPS885 series supports Window 7. To facilitate the installation of system driver, please carefully read the instructions in this chapter before start installing.  Insert Intel Express Installer Driver CD and select the “\Driver\”.
  • Page 46 OPS885 User’s Manual This page is intentionally left blank. Drivers Installation...

  • Page 47: Chapter 5 Ami Bios Setup Utility

    OPS885 User’s Manual CHAPTER 5 AMI BIOS SETUP UTILITY This chapter provides users with detailed description how to set up basic system configuration through the AMIBIOS8 BIOS setup utility. Starting To enter the setup screens, follow the steps below:  Turn on the computer and press the <Del>...

  • Page 48: Main Menu

    OPS885 User’s Manual Main Menu When you first enter the Setup Utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. There are two Main Setup options. They are described in this section. The Main BIOS Setup screen is shown below.

  • Page 49: Advanced Menu

    OPS885 User’s Manual Advanced Menu  Launch PXE OpROM Use this item to enable or disable the Boot ROM function of the onboard LAN chip when the system boots up. The Advanced menu also allows users to set configuration of the CPU and other system devices.
  • Page 50 OPS885 User’s Manual  ACPI Settings You can use this screen to select options for the ACPI Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen. ...
  • Page 51 OPS885 User’s Manual  S5 RTC Wake Settings Enable or disable system wake on alarm event. When enabled, System will wake on the hr:min::sec specified AMI BIOS Setup Utility...
  • Page 52 OPS885 User’s Manual  Trusted Computing Enables or disables BIOS support for security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available. TCG EFI protocol and INT1A interface will not be available. AMI BIOS Setup Utility...
  • Page 53 OPS885 User’s Manual  CPU Configuration This screen shows the CPU Configuration, and you can change the value of the selected option.  Hyper-threading This feature can enable /disable Intel Hyper-Threading technology  Intel Virtualization Technology Allows a hardware platform to run multiple operating systems separately and simultaneously, enabling one system to virtually function as several systems.
  • Page 54 OPS885 User’s Manual  SATA Configuration You can use this screen to select options for the SATA Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen. ...
  • Page 55 OPS885 User’s Manual  PCH-FW Configuration You can use this screen to confirm ME Firmware version. AMI BIOS Setup Utility...
  • Page 56 OPS885 User’s Manual  USB Configuration You can use this screen to select options for the USB Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen. ...
  • Page 57 OPS885 User’s Manual  USB Ports Per-Port Disable Control each of the USB ports (0~13) ports  F81801 Super IO Configuration Set Parameters of Serial Port (COM 1 UART) AMI BIOS Setup Utility...
  • Page 58 OPS885 User’s Manual  F81801 H/W Monitor This screen shows the Hardware Health Configuration, And Enable or disables smart fan. AMI BIOS Setup Utility...

  • Page 59: Chipset Menu

    OPS885 User’s Manual Chipset Menu The Chipset menu allows users to change the advanced chipset settings. You can select any of the items in the left frame of the screen to go to the sub menus:  PCH–IO Configuration  System Agent(SA) Configuration AMI BIOS Setup Utility...
  • Page 60 OPS885 User’s Manual  PCH–IO Configuration PCH Azalia Configuration settings  PCH Azalia Configuration PCH Azalia Configuration settings.  PCH LAN Controller Enable or disable onboard NIC  Wake on LAN Use this item to enable or disable integrated LAN to wak the system. (The Wake On LAN cannot be disable if ME is on at Sx satate).
  • Page 61 OPS885 User’s Manual  System Agent(SA) Configuration  CPU SA Audio Device (BO:D3:F0) Enable or disable CPU SA audio device  Graphics Configuration Config graphics settings.  Memory Information Memory configuration parameters AMI BIOS Setup Utility...
  • Page 62 OPS885 User’s Manual  Primary IGFX Boot Display Select the video device which will be activated during POST.This has no effect if external graphics presents.Secondary boot display selection will appear base on your selection.  DVMT Pre-Allocated Pre-allocated memory is the small amount of system memory made available at boot time by the system BIOS for video.
  • Page 63 OPS885 User’s Manual  Memory Information Memory configuration parameters  Max TOLUD This item allows you to set Maximum Value of TOLUD AMI BIOS Setup Utility...

  • Page 64: Boot Menu

    OPS885 User’s Manual Boot Menu The Boot menu allows users to change boot options of the system. You can select any of the items in the left frame of the screen to go to the sub menus: (images requires to update) ...

  • Page 65: Security Menu

    OPS885 User’s Manual  Launch PXE OpROM policy Controls the execution of UEFI and Legacy PXE OpROM  Boot Option #1 Sets the system boot order  Boot Option #2 Sets the system boot order  Hard Drive BBS Priorities Set the order of the legacy devices in this group.

  • Page 66: Save & Exit Menu

    OPS885 User’s Manual Save & Exit Menu The Save & Exit menu allows users to load your system configuration with optimal or failsafe default values.  Save Changes and Exit When you have completed the system configuration changes, select this option to leave Setup and return to Main Menu.
  • Page 67 OPS885 User’s Manual  Discard Changes and Reset Select this option to quit Setup without making any permanent changes to the system configuration and reboot the computer. Select Discard Changes and Reset from the Save & Exit menu and press <Enter>. Select Yes to discard changes and reset.
  • Page 68 OPS885 User’s Manual This page is intentionally left blank. AMI BIOS Setup Utility...

  • Page 69: Appendix Areference Documents

    OPS885 User’s Manual APPENDIX A REFERENCE DOCUMENTS Reference Documents...
  • Page 70 OPS885 User’s Manual This page is intentionally left blank. Reference Documents...

  • Page 71: Appendix B Trusted Platform Module (Tpm) Installation

    OPS885 User’s Manual APPENDIX B Trusted Platform Module (TPM) Installation Trusted Platform Module Installation The OPS885 series model offers Trusted Platform Module(TPM) feature. Please follow the steps: Step 1 Before installing the TPM driver, please restart the computer and press the <Del>...
  • Page 72 OPS885 User’s Manual Step 2 Please press <F4> to save the change and <ESC> to exit the BIOS set up menu Trusted Platform Module (TPM) Installation...
  • Page 73 OPS885 User’s Manual Step 3 Press the <Del> key immediately once again and enter main BIOS setup menu displays, go to Advanced menu and enable TPM state And then press <F4> to save the change and exit the BIOS set up menu, you are able to enable Trusted Platform Module feature.
  • Page 74 OPS885 User’s Manual Step 4 After accessing to OS, go to Computer session of the Start and right-click mouse and chose Properties Step 5 After entering the Properties session, chose the Unknown device and right click and chose Update Driver Software Trusted Platform Module (TPM) Installation...
  • Page 75 OPS885 User’s Manual Step 6 Chose “Browse for driver software on your computer” and find the driver and press OK for loading Step 7 After choosing, press Next to finish the update Trusted Platform Module (TPM) Installation...
  • Page 76 OPS885 User’s Manual And then the TPM driver is updated successfully. Step 8 While you installed TPM driver successfully, you can be able to install TPM application.program. Trusted Platform Module (TPM) Installation...

  • Page 77: Appendix C Watchdog Timer

    OPS885 User’s Manual APPENDIX C WATCHDOG TIMER Watchdog Timer Setting After the system stops working for a while, it can be auto-reset by the W atchdog Timer. The integrated Watchdog Timer can be set up in the system reset mode by program.
  • Page 78 OPS885 User’s Manual This page is intentionally left blank. Watchdog Timer...

  • Page 79: Appendix D Iamt Settings

    OPS885 User’s Manual APPENDIX D iAMT SETTINGS The Intel® Active Management Technology (Intel® iAMT) has decreased a major barrier to IT efficiency that uses built-in platform capabilities and popular third-party management and security applications to allow IT a better discovering, healing, and protection their networked computing assets.

  • Page 80: Set & Change Password

    OPS885 User’s Manual  C.2 Set & Change Password You will be asked to set a password when first log in. The default password is ‘admin’. Change  You will be asked to change the password before setting ME iAMT Settings...

  • Page 81: Intel® Iamt Settings

    OPS885 User’s Manual  You must confirm your new password while revising. (as Remark 1) password must contain:(example: !!11qqQQ) (default value)Eight characters  One upper case  One lower case  One number One special symbol, such as ! 、 $ or ; ，(、 " , excepted) ...
  • Page 82 OPS885 User’s Manual ® Key in the Host Name. If Intel iAMT set to ‘DHCP‘, the Host name must be identical to the operating system mechanic. (3-1) Select TCP/IP to get into Network interface, and set it to ‘ENABLED’; into DHCP Mode, and set it to ‘DISABLED’...
  • Page 83 OPS885 User’s Manual You can make the following settings: Remark 2 DHCP Mode ‘DISABLED‘: if DHCP Mode is disabled,  IP address  Subnet mask iAMT Settings...
  • Page 84 OPS885 User’s Manual  Preferred DNS address  Alternate DNS address iAMT Settings...

  • Page 85: Iamt Web Console

    OPS885 User’s Manual  Domain name 4.Exit from MEBx after completing the iAMT settings.  C.4 iAMT Web Console 1.From a web browser, please type http://(IP ADDRESS):16992, which connects to iAMT W eb. Example: http://10.1.40.214:16992 iAMT Settings...
  • Page 86 OPS885 User’s Manual To log on, you will be required to type in username and password for access to the Web. USER: admin (default value) PASS: (MEBx password) Enter the iAMT W eb. Click Remote Control, and select commands on the right side. When you have finished using the iAMT W eb console, close the W eb browser iAMT Settings...

  • Page 87: Appendix E Intel Rapid Storage Technology

    OPS885 User’s Manual APPENDIX E ® INTEL RAPID STORAGE TECHNOLOGY NOTE: This feature requires that the SATA controller be set to RAID mode via the system BIOS. Intel ® Smart Response Technology is an Intel ® Rapid Storage Technology (RST) caching feature that improves computer system performance.
  • Page 88 OPS885 User’s Manual 8. Run the Intel RST software thought the ALL Programs menu or the task bar icon. 9. Click “Enable acceleration” either under “Status” or “Accelerate” 10. Select the SSD to be used as a cache device. 11. Select the size from the SSD to be allocated for the cache memory. NOTE: Any remaining space on the SSD may be used for data storage using the simple data single-disk RAID 0 volumes that is automatically created.
  • Page 89 OPS885 User’s Manual Maximized mode: Acceleration optimized for input/output performance. 14. The page refreshes and reports the new acceleration configuration in the Acceleration View. 15. Congratulations! Your system is now successfully configured with the Intel Smart Response Technology! For more information on Intel Smart Response Technology, please visit: http://www.intel.com/p/en_US/support/highlights/chpsts/imsm Remark: Intel®...
  • Page 90 OPS885 User’s Manual This page is intentionally left blank. ® Intel Rapid Storage Technology...

Table of Contents