Maintenance - Planet 15 meter IR Dome Internet Camera ICA-530 User Manual

Daylight Saving
Stop Time
Daylight Saving
Offset

3.7.3 Maintenance

Hard Factory Default
(Include the network
setting)
Factory Default (Except
the network setting)
Backup Setting
Restore Setting
Firmware Upgrade
Sets up the date and time of daylight saving stop time.
Sets up the date of daylight saving offset.
Recall the device hard factory default settings. Note that click this
button will reset all device's parameters to the factory settings
(including the IP address).
The unit is restarted and most current settings are reset to factory
default values. This action will not reset the network setting.
To take a backup of all of the parameters, click this button. If
necessary, it will then be possible to return to the previous settings,
if settings are changed and there is unexpected behavior.
Click the "Browse" button to locate the saved backup file and then
click the "Restore Setting" button. The settings will be restored to the
previous configuration.
The device supports new firmware upgrade.
1. Close all other application programs which are not necessary for
firmware update.
2. Make sure that only you access this device at this moment
51