Factory Default Reset - Cradlepoint CTR350 User Manual

After you reboot your CTR be sure to look
for it by the new SSID. (Network Name)
Select Reboot the Device to save your changes. Allow a
few moments for your CTR to reboot and your computer
to re-associate with the network.
When you login you will be asked to enter you password according to your new security settings. If at
anytime you cannot remember your password you can reset the CTR to it's factory default settings.
Fact ory D efault Reset
The Factory Default reset will clear all your saved settings on the CTR. The user name and password will
revert back to the original "CTR-xxx" SSID and use the last 6 digits of the MAC Address for the password.
To use the factory default reset, simply:
1. Un-plug the CTR from external power.
2. Locate the Factory Reset button at the rear of the unit.
3. Press and hold the Reset button while you plug the CTR back into external power.
4. Release the button after you see the LEDs flash ON, OFF, then ON again.
16