Radio Operation; Listening To The Radio; Storing And Listening To A Memory Station - Xomax XM-D1002 Installation Manual

Touch Screen Operation

RADIO OPERATION

Listening to Radio
Touch the RADIO ICON in home menu
to enter the RADIO mode. In radio mode,
tap icon to adjust the brightness for
the display .
Selecting The Frequency Band
Touch the screen of " BAND
section repeatedly to select the band ,
the message will show in turn :
FM1 FM2
AM2(MW2)
When an FM stereo broadcast
is hard to receive
Press "ST/MO
or STEREO mode .
Start Searching For a Station
Manual Search
During Radio mode, briefly touch "
to increase frequency by one step of
channel spacing.
"
FM3
AM1(MW1)
"to select the MONO
Briefly touch "
by one step of channel spacing.
Automatic Search
During Radio mode, touch and hold
(for more than 2 seconds ) either "
ICONS to start search for a radio station
automatically.
To tune in strong-signal FM
Station only (LO/DX function)
In radio mode, tap
LOC/DX mode of Local and Long-
distance traffic news.
Storing and Listening to a
Memory Station
Setting Memory
With this system, a total of 30 stations
can be stored in the memory of six
buttons. Each band stores up to six
preset stations. The stations might be
FM1, FM2, FM3, AM1(MW1), and
AM2(MW2) band.
The operation is as below :
- Store in Memory
>Select the frequency band
>Select the station
>Press and the station until it show
the frequency band your select.
- Retrieve a preset station
Touch the 1-6 ranges briefly to retrieve
a station which had been stored in the
"
memory in advance the chose number
is shown on display .
-18-
" to decrease frequency
icon to select
/ "