Setting Illumination Color; Setting Wallpaper; Version About; Audio Setup - Xomax XM-D1002 Installation Manual

Basic Operation
Please make sure unit connect SWC
wire first, and then press the wheel
button, then press the corresponding
button on screen.
To cancel input setting, please press
button.
High-z means high-impedance.
Tap to reduce the magnitude of
voltage. This key for avoid that
voltage is too high that the car
system can not differentiate the
input key set for some car.
Low-z means low-impedance.
Tap to increase the magnitude
of voltage. This key for avoid
that voltage is too low that the
car system can not differentiate
the input key set for some car.
Illumination color
Select the message will show as:
Touch to adjust the RGB level for all
buttons and display. Tap auto icon the
color change automatically.
Wall paper
Press to select wallpaper as:

Version about

Press to show the information for
software. Press
to download the control APP.
to show QR cord that

AUDIO SETUP

Touch the
adjustment.
To select as :
-> Rock -> Pop -> Jass -> Electric.
To adjust audio effect for your car.
Subwoofer:
To turn subwoofer on or off.
Loudness:
To turn loudness on or off.
Loudness Center Frequency:
To select loudness frequency.
To adjust the volume level as: Disc, USB,
Card, Radio, AUX and AV mode.
Note: In Video model, press SEL to adjust
EQ as the color effect as:
Brightness -> Contrast -> Hue ->
Saturation -> Sharpness.
-13-
icon to turn to audio quality
Standard -> Classic