Preparing The Remote Control - Xomax XM-D1002 Installation Manual

Remote Control
Ref # Button
11
AUDIO/5
12 MENU/4
13&21 VOL+/-
14 SEL
15
MUTE
16
BAND/
18
EQ
19 RDM/3
20
SUB-T/6

Preparing the Remote Control

Inserting the Battery
1.First push to inside as the direction indicated by the arrow (See
Remove the battery holder as the direction indicated by the arrow (See
2.Replace the battery Set a new battery property with (+)side up as illustrated
3
(See ).
3.Insert the battery holder. Push in the holder to the original position(See
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal
receiver).
Operation angle: About
Note :
The lithium cell in the battery compartment of remote control has been secured for
transport with a
remote control is ready for operation .
Same operation as audio in video operation.
In radio mode, press to select the store station 5.
Press this button briefly to display the root level directory of a digital
video disc.
In radio mode, press to select the store station 4.
Use these controls to adjust the volume level.
Press to turn to EQ setting.
Press this button to turn off the audio. Press again to restore the
sound to its prior volume level.
In Radio mode, press this button repeatedly to switch between
the five radio bands: FM1 > FM2 > FM3 > AM1(MW1) > AM2 (MW2).
In BT mode, press to reject a call.
Press repeatedly to cycle through the different equalizer curve
presets you may wish to use for enhanced listening.
Random function for media playing;
In radio mode, press to select the store station 3.
In Digital Video Disc Playback mode, pressing this button will
allow you to change the subtitle language on discs which have
this as an option.
In radio mode, press to select the store station 6.
30 degree in each the direction of the front of the IR mark.
plastic
. Before initial use please remove this plastic so that the
Function
-10-
)And then
1
).
2
).
4