Radio Function Operation - Xomax XM-2DTSB6219BT Manual

Radio Function Operation

1. Enter/exit
Touch [Radio] icon in the main interface to enter into the radio
interface.
After touching the icon[ ] to enter main interface, then touch any
other function icon, the radio mode will exit automatically.
Touch the icon[ ]to return to the upper interface.
Touch the icon[ ]to enter setting interface.
Touch the icon[ ]to show the current volume.
Touch the icon [ ] on radio interface to enter the interface below:
2.EQ setting
Touch the icon [ ] to set sound effect mode.
3.Turn on/off the Long/Short-range
Click [ ]icon, the search pattern in the local search (LOC) and remote
search(DX) switch between.LOC feature is turned on after the signal is strong enough only to listen
to those in good condition and receiving radio station; DX enabled, you can receive remote weak radio
signals.
Note: This function is available only when FM band is selected.
4.Loudness on/off
Click[ ]icon so as to turn on/off loudness function.
5. Stereo on/off
When receiving stereo signals, click[ ] icon to turn on/off stereo.
6.PTY
Touch the button the screen displays program types, users can search station according to program type.
7.TA (Receive traffic information)
ON: When the traffic station is turned on, the radio will automatically search for traffic stations.After
a station is searched, screen displays "TP". Only when traffic information is broadcasted can it be
received, after traffic information is completed, the radio will automatically switch to the previous mode.
OFF: Repress [TA] button to close TA function. In other modes, traffic announcement will automatically
switch to radio mode, after the traffic announcement is completed, it will automatically switch to the
previous mode
8.AF
Touch the button to turn the AF function on/off. AF function is turned on, When the received station
signals become weak, the radio will automatically fine-tune to other frequencies. When receiving an
emergency announcing, the screen will display warning message.
Note: If the unit does not have RDS function, it has no PTY/TA/AF function.
9.Band switching
Touch the icon[ ] on radio interface to switch the bands among AM1、AM2、FM1、FM2、FM3
10.Search/Store/Scan stations
Short-press the icon[ ] on the radio interface to browse the pre-stored stations, long-press this button
to search stations and store the strongest signal station on the screen.
Press the icon [ ] on the radio interface to search the next station.
Press the icon [ ] on the radio interface to search the previous station.
07
Multimedia function
SD/USB storage device
When connected with an external SD/USB storage device, the unit may
playback the music/image/video files in it.
Return to current playing interface
Click the icon [ ] in SD/USB main menu to switch to current playing
interface quickly.
Music playing
Play the music files in SD/USB device; Click the icon [
previous file list page.
Click the icon [ ] to enter music playing interface.
Touch the icon [ ] in SD/USB music interface to enter the interface below:
Touch the two icons [ ] /[ ]to preview the files upwards/downwards; Click the icon [
the current file.
Image playing
Click the icon [ ] in SD/USB main menu to enter image playing interface:
Touch this icon to rotate the image.
Touch this icon to switch special effects.
Under image-playing status, touch this icon to enable MP3 music playing and retouch this icon to
disable the music playing.
Video playing
Tap the icon [ ] in SD/USB main menu to enter video playing interface; for video playing function
instruction, please refer the section "Disc function operation"
] in SD/USB main menu to return to the
] to play
08