Troubleshooting - Black+Decker HSV320J32 Instruction Manual

Problem
• Unit will not start.
• Battery will not charge.
• Unit turned off,
or will not charge.

TROUBLESHOOTING

Possible Cause
• Battery not charged.
• Charger not plugged in. • Plug charger into a working
• Surrounding air
temperature too hot or
too cold.
• Switch left in on position. • Ensure the on/off switch is in the
• Unit displays 4 flashing LEDs • Charge fault, refer to "Charging
on the charging indicator. Instructions". Temperature fault,
Possible Solution
• Check battery charging
requirements.
outlet. Refer to "Important
Charging Notes" for more details.
• Check current at receptacle by
plugging in a lamp or other appliance.
• Check to see if receptacle is
connected to a light switch which
turns power off when you turn out
the lights.
• Move charger and tool to a
surrounding air temperature
of above 40 degrees F(4.5°C) or
below 105 degrees F (+40.5°C).
off position.
allow unit to rest and cool down.
Rotary brush jammed, refer to
"Rotary brush removal instructions"
and clear obstruction. Then restart
the unit.