G3D T-1000 Quick Start Manual page 3

UNBOXING ANG SETTING UP THE T-1000
REMOVE THE ACCESSORY FOAM SUPPORT
7
LIFT THE T-1000 BOX
8
Remove the plastic cover of the T-1000.
LIFT THE T-1000 3D PRINTER
9
Printer can be heavy for one person. 2 person lift
can be optional. Use the side handles of the printer
to separate the printer from the bottom foam
support. Place the printer on a flat ground.
REMOVE THE HEAD STOPPER
10
Rotate the head stopper counter clockwise to
detach from the build plate assembly.
INSERT THE BUILD PLATE
11
LOCK THE HEAD STOPPER
12
Rotate the head stopper clockwise to lock. Do not
overtighten.