G3D T-1000 Quick Start Manual page 2

UNBOXING ANG SETTING UP THE T-1000
TRIM THE TAPED EDGES
1
Use a cutter to trim the taped edges.
CHECK THE ACCESSORIES
2
Lift the accessory box handles. Open the accessory
box to check if the accessories are inside.
REMOVE THE ACCESSORY BOX
3
TILT THE T-1000 BOX
4
Slightly tilt the T-1000 box. Make sure to hold or
lean the T-1000 box against a wall to prevent from
falling.
TRIM THE BOTTOM TAPED EDGES
5
OPEN THE BOTTOM FLAPS
6
Unfold the bottom flaps of the T-1000 box.