Bosch DA50 SensorSecure Operating Instructions Manual page 7

&
Set the steam regulator (3) to the ~
,. position and unplug the iron from
the mains!.
1. Open the water inlet lid (5).
2. Fill the water tank (11). Never fill beyond
. the level mark for maximum filling (8).
Remove any label or protective cover
from the soleplate (7).
During it first use the iron may produce
certain vapours and odours that will die
away after a few minutes.
1..Spray button
.2. Shot of steam button
3. Steam regulator
4. Water inlet
5. Water inlet lid
6. Spray nozzle
7. Soleplate
8. Level mark for maximum filling
9. Temperature index
10. "clean" button
11. Water tank
12. Temperature control
13. Pilot light
14. Power cord
15. "SensorSecure" light
16. "TextileProtect" fabric protector *
17. Descaling fluid
*
18. "StoreProtect" accessory
*
This appliance has been designed to use
normal
t~p
water.
• The addition of other liquids, (unless
recommended by Bosch) such. as
perfume, will damage the appliance.
• Do not use condensation water from tumble
dryers, air conditioning systems or similar.
Any damage caused by the use of the
aforementioned products will make the
guarantee void. 3. Close the water inlet lid.
* Model dependent