Bosch Sensixx‘x DA70 Operating Instructions Manual

Bosch Sensixx‘x DA70 Operating Instructions Manual

Hide thumbs Also See for Sensixx‘x DA70:

Advertisement

Register your new Bosch now:
http://www.bosch-home.co.uk
Sensixx'x DA70
en Operating instructions

Advertisement

Table of Contents
loading

Summary of Contents for Bosch Sensixx‘x DA70

  • Page 1 Register your new Bosch now: http://www.bosch-home.co.uk Sensixx‘x DA70 en Operating instructions...
  • Page 3: Table Of Contents

    Index General safety instructions Description Before using your appliance for the first time Using your appliance 1. Filling the water tank 2. Setting the temperature 3. Ironing with steam 4. Shot of steam 5. Vertical steam 6. Ironing without steam 7.
  • Page 4: General Safety Instructions

    EN • Operating instructions Thank you for buying the Sensixx‘x DA70 steam iron from Bosch. Carefully read through the operating instructions for the appliance and safeguard them for future reference. You can download this manual from the local homepages of Bosch.
  • Page 5: Advice On Disposal

    Important notices • This appliance must be connected to an earthed socket. If it is absolutely • This appliance has been designed necessary to use an extension cable, exclusively for domestic use and must not make sure that it is suitable for 16A and be used for industrial purposes.
  • Page 6 TDZ1550 TDZ1101 TDZ1750 * Model dependent B O SC H...
  • Page 7: Filling The Water Tank

    This appliance has been designed to use normal tap water. • The addition of other liquids, (unless recommended by Bosch) such as perfume, will damage the appliance. • Do not use condensation water from tumble dryers, air conditioning systems or similar.
  • Page 8: Setting The Temperature

    ☞ Tip: To prolong the optimum steam function, you may mix tap water with distilled water 1:1. If the tap water in your district is very hard, mix tap water with distilled water 1:2. You can inquire about the water hardness with your local water supplier.
  • Page 9: Ironing With Steam

    3. Ironing with steam 2.3 “AntiShine” function* If this function is selected, the risk of shiny The steam regulator (3) is used to adjust marks on the garment due to the ironing is the amount of steam produced when reduced. ironing.
  • Page 10: Shot Of Steam

    ☞ Tip: For better ironing results, iron the 5. Vertical steam last strokes without steam to dry the garment. This can be used to remove creases from hanging clothes, curtains etc. 4. Shot of steam Never direct the steam jet at garments shot that are being worn.
  • Page 11: Ironing Without Steam

    2. Hang article of clothing on a clothes 6. Ironing without steam hanger. Operate the iron in a vertical position at a distance of 10 cm / 4 in, and press the shot of steam button This enables the iron to be used for dry (2) repeatedly with pauses of at least 5 ironing.
  • Page 12: Drip Protection

    7. Drip protection * 9. “SensorSecure” function DripStop lf the temperature is set too low, the steam The “SensorSecure” function switches is automatically switched off to avoid off the iron when the handle is no longer dripping. gripped, thus increasing safety and saving energy.
  • Page 13: After Ironing

    3. If the iron handle is released for more 2. Empty the tank. Hold the iron with the than 10 seconds, the iron will stop point down and shake lightly. heating automatically. 4. When the handle is gripped again, the iron heating up and continuous steam generation processes will start again.
  • Page 14: Tips To Help You Save Energy

    Tips to help you save Cleaning & Maintenance energy Steam production consumes the most Attention! Risk of burns! energy. To help minimise the energy used, Always unplug the appliance from follow the advice below: the mains supply before carrying 1. Start by ironing the fabrics that require out any cleaning or maintenance the lowest ironing temperature.
  • Page 15: Calc’nclean

    2 Set the temperature control (12) to the Multiple descaling system “max” position and plug in the iron. AntiCalc D. anti-calc A. self-clean B. Calc'nClean 3 After the necessary warm-up period, the “TempOK” lights inside the temperature control (12) stop flashing. Then, unplug the iron (very important!).
  • Page 16: Calc’nclean” With Descaling Liquid

    For deep descaling, it is recommended to use the descaling liquid especially developed by Bosch. This procedure should be carried out every 3 months. 1. Fill the water tank (11) with tap water mixed with a measure (25 ml) of the descaling liquid (16*).
  • Page 17: Textileprotect" Fabric Protector

    anti-calc* “StoreProtect” * The “anti-calc” cartridge has been designed StoreProtect to reduce the build-up of scale produced during steam ironing, helping to extend the The “StoreProtect” accessory (17*) useful life of your iron. Nevertheless the enables an immediate and safe storage “anti-calc”...
  • Page 18: Trouble Shooting

    Trouble shooting Problem Probable cause Solution The iron does 1. Temperature control (12) set 1. Turn to a higher position. not heat up. to minimum. 2. The “SensorSecure” system 2. Grip the handle of the iron to has been activated. The iron re-start it.
  • Page 19: Guarantee Conditions

    Guarantee conditions The terms of the guarantee for this appliance are in accordance with that stated by our representative for the country in which it is sold. The details of these conditions can be obtained from the retailer from whom the appliance was purchased.
  • Page 20 Customer Service Great Britain Bosch Customer Service UK +44 (0)344 892 8979 Grand Union House IRL +353 (0)1450 2655 Old Wolverton Road Milton Keynes www.bosch-home.co.uk MK12 5PT 002 Sensixx´x DA70 GB/10/14...

Table of Contents