Panasonic SR-HZ106 Operating Instructions Manual page 14

What to do when...
●If the suggestions on P. 24–25 do not bring about any
improvement, you can change the settings.
●Steps 2, 3 and 4 must each be completed within 16 seconds.
When no operation is performed for 16 seconds, the display
returns to the current time. (Setting cannot be made.)
→ Please restart the procedure.
●After the setting is completed, the display returns to the
current time.
●To go back to the previous setting, follow the procedure again.
If you want to change the keep warm temperature.
1
Press and set " " to
"Quinoa/Quick"
●Select "Quinoa/Quick" under "White Rice" or
"Rinse-Free".
2
Press You will not hear a beep.
Press You will not hear a beep.
Press
3
Press
●The default setting is "74".
26
(74→76→72)
4
When it smells
Press
Set to "76".
After 10 seconds
(Setting ends automatically.)
When color has changed or it is dry
Press
Set to "72".
After 10 seconds
(Setting ends automatically.)
If burning is a concern.
1
Press and set " " to
"Quinoa/Quick"
●Select "Quinoa/Quick" under "White Rice" or
"Rinse-Free".
2
You will not hear a beep.
Press
Press You will not hear a beep.
Press
3
Press
Select "02".
Press
4
Press
Set to "So:Lo".
After 10 seconds
( Setting ends automatically.)
To stop the buzzer sounding
(end sound) during cooking,
reheating and cleaning.
1
Press and set " " to
"Quinoa/Quick"
●Select "Quinoa/Quick" under "White Rice" or
"Rinse-Free".
2
Press and hold down
(for approximately 5 seconds)
●This change does not switch off the button sounds.
27