Connecting The Display To Your Computer; Connecting The Ac Power; Connecting The Audio Cable; Setting Up The Lcd Monitor - Planar PL1911M User Manual

Connecting the Display to your Computer

1. Power off your computer.
2. Connect one end of the signal cable to the LCD Monitor's VGA port
or DVI port.(See Fig 1-5)
3. Connect the other end of the signal cable to the VGA port or DVI port
on your PC.
4. Make sure connections are secure.

Connecting the AC Power

1.
Connect the power cord to the LCD Monitor. (See Fig. 1-6)
2.
Connect the power cord to an AC power source.

Connecting the Audio Cable

1.
Connect the audio cable to the "LINE OUT" jack on your PC's audio
card or to the front panel's "AUDIO OUT" jack of your CD ROM
drive. (See Fig. 1-7)
2.
Connect the other end of the audio cable to the LCD Monitor's " LINE
IN " jack.

Setting Up the LCD Monitor

1.
Make sure the AC power cord is connected to the LCD Monitor.
2.
Turn on the LCD Monitor's power switch, located on the bezel of the monitor.

Power Management System

This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The
VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync. signal.
When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED
indicator will light yellow.
6
Figure 1-5
Figure 1-6
Figure 1-7