TESTO 805i Startup Instruction page 4

6 Transmitting reading
5 LED status
LED status
Flashing red
Flashing yellow
Flashing green
6 Transmitting reading
✓ The Smart Probes are switched on and connected to their mobile
terminal via Bluetooth.
1. The Smart Probes' readings are automatically shown in the standard
display.
2. Press the key.
- The reading that is currently present is held.
3. Press the key again.
- The instrument again displays the current readings.
These commissioning instructions describe the basic operating
steps.
To find out how to handle the product safely and for detailed
information, please refer to the instruction manual at:
www.testo.de/SmartProbesManals.html.
RF Exposure:
This equipment complies with FCC RF radiation exposure limits set forth
for an uncontrolled environment.
Canada IC Statement:
This device complies with RSS-247 of Industry Canada
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
4
Meaning
Low battery status
• Smart Probe is switched on.
• Smart Probe searching, but not yet connected.
• Smart Probe is switched on.
• Bluetooth is connected.
0970 4920 en 01