Getting started
Installation options
Wall mount to desktop installation
To change the telephone base from the wall mount position to desktop
position, make sure that you first unplug the power adapter and telephone
line cord from the wall outlets before you begin.
1. Slide the telephone base
upwards, then pull the telephone
base away from the wall off of
the mounting studs.
2. Remove the telephone line cord
and power adapter plug from the
telephone base.
3. Press the bracket downwards
until the bracket clicks into place
and is secure.
4. Plug the telephone line cord
into the telephone base and
telephone wall jack, then plug
the power adapter plug into
the telephone base and to
an electrical wall outlet not
controlled by a wall switch (see
page 5).
Telephone
line cord
DSL filter
Telephone wall
jack
9
Power
adapter
Electrical outlet
not controlled by
a wall switch