Installing the Battery
1.
Place your fingernail in the cut-out at the bottom left of
the back cover, and pop the cover off the phone.
2. Insert the battery by aligning the metal contacts on
the battery with the metal contacts in the battery
compartment. Gently push down on the battery until it
clicks into place.
3. Replace the cover over the back of the phone, and
then press down along the edges to secure. Make
sure there is no gaps around.
Charging the Battery
Your phone's battery should have enough power for the
phone to turn on, find a signal, and make a few calls. You
should fully charge the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and USB cables. The
use of unapproved accessories could damage your
phone or cause the battery to explode.
14